Integrity Cable Co., Limited
High quality cable manufacturer！ 5G communication cable | EV Cable
Add to Cart
Cat6 Outdoor UTP High Speed Network Cable 23AWG Extend to 550MHz Solid PVC+PE 1000FT
Quick Detail:
· Core wire selection, solid pure copper as the conductor.
· The basic bandwidth is 250MHz and can be expanded to 550MHz.
· The outer layer adopts a double-layer structure of PVC+PE, 60P, -20~75℃
· Cat6 Cable Rate temperature:60℃ 75℃
· UTP Cat 6 Cable InstallationTemperature: -30℃-+50℃
· Complies to ANSI/TIA-568-B.2&IS0/IEC11801
· UL compliant, TUV, CPR, ETL, CSA, RCM, ISO9001, CE, RoHS
Description:
> Cat6 UTP Outdoor Cable Provide 250MHz bandwidth within a distance of 90 meters. The typical application rate is 1000Mbps.
>Cat6 Outdoor Cable selects high-quality oxygen-free copper as the transmission conductor. At the same time, it adopts the design of a central cross-shaped PE skeleton to separate four individual pairs.
>The outer layer of Cat6 outdoor UTP network cable adopts a PVC+PE double-layer structure, which has stronger wear resistance and aging resistance. Can be well applied to outdoor wiring operations.
>Cat 6 cable is suitable for outdoor environments and has good weather resistance, waterproof performance, and ultraviolet resistance. It can be used for a long time under harsh outdoor conditions.
| Product Description | |
| 1 | Inner Conductor |
| 2 | Insulation |
| 3 | Cross Member |
| 4 | Inner Jacket |
| 5 | Ripcord |
| 6 | Outer Jacket |
Specifications:
| Product Description: CAT6 U/UTP 23AWG Solid Outdoor PE+PVC Cable | ||||||
| Rev.: A | ECN Description: | |||||
| Construction Item Description | Electrical Property | |||||
|
Conductor |
Material | Bare Solid Copper(elongation: 19 ~ 24%) | Conductor Resistance at 20°C | ≤ 9.5 Ω / 100m | ||
| OD | 23 AWG | Resistance unbalance within a pair | ≤ 2% | |||
|
Insulation |
Material |
HDPE 8303 | Insulation Resistance at 20°C after 2min of electrification under a DC voltage between 100 & 500V |
>1500 MΩ / 100m | ||
| OD | 1.14 ± 0.05 mm | Mutual capacitance | 5600 pF / 100m MAX | |||
| Average THK | 0.29 mm | Capacitance unbalance pair to ground at 800Hz or 1 kHz | ≤ 160 pF / 100m | |||
|
Color | 1p: white + 2 blue stripes & blue | Characteristic impedance at 100MHz | 100 ± 15 Ω | |||
| 2p: white + 2 orange stripes & orange | Dielectric Strength Test Voltage (cd/cd,cd/screen): 1.00KV DC or 0.7 KV AC for 1 min |
No breakdown | ||||
| 3p: white + 2 green stripes & green | Mechanical Property | |||||
| 4p: white + 2 brown stripes & brown |
insulation | elongation before aging | ≥ 300% | |||
|
Pair Twist |
Lay & Direction | 1p: S=20.0 mm (28%) | tensile strength before aging | ≥16 MPa | ||
| 2p: S=17.5 mm (24%)) | elongation after aging | ≥ 150 % | ||||
| 3p: S=22.0 mm (32%) | tensile strength after aging | ≥10.5 MPa | ||||
| 4p: S=15.5 mm (21%) |
jacket | elongation before aging | ≥350% | |||
| OD | / | tensile strength before aging | ≥9.7MPa | |||
|
Inner Assemble | Lay | S=90 ± 5 mm | elongation after aging | ≥263% | ||
| Direction | according to the drawing | tensile strength after aging | ≥7.3MPa | |||
| Filler | / | Packing | ||||
| OD | / | Inner Box | NA | |||
| Filler | Material | Ripcord | Master Carton | NA | ||
| Construction | 300D |
| ||||
|
Outside Shield | Shield | / | ||||
| Construction | / | |||||
| Material | / | |||||
| Coverage | / | |||||
|
Jacket | Material | Inner Jacket: PVC + Outside Jacket: PE | ||||
| Hardness | / | |||||
| OD | 5.8 / 7.2 | |||||
| Average THK | / | |||||
|
Color | BLACK | |||||
|
Marking Color | WHITE | |||||
|
Marking | according to the customer's requirements | |||||
| Construction Item Description | |||
|
Conductor | Construction | AWG | 23 |
| Material | / | Bare Solid Copper | |
|
Insulation | Material | / | HDPE 8303 |
| Proportion | g/cm³ | 0.97 | |
| Outside Diameter | mm | 1.14 ± 0.05 | |
| Average Thickness | mm | 0.29 | |
|
Color |
/ | 1p: blue stripe + white + blue stripe & blue | |
| 2p: orange stripe + white + orange stripe & orange | |||
| 3p: green stripe + white + green stripe & green | |||
| 4p: brown stripe + white + brown stripe & brown | |||
|
Pair Twist |
Lay & Direction |
/ | 1p: S=20.0 mm (28%) |
| 2p: S=17.5 mm (24%) | |||
| 3p: S=22.0 mm (32%) | |||
| 4p: S=15.5 mm (21%) | |||
| Inner Assemble | Lay & Direction | / | S=90 ± 5 mm |
|
Filler | Ripcord | / | 300D |
| Cross Member | / | HDPE | |
|
Outside Shield | Shield | / | / |
| Construction | mm | / | |
| Material | / | / | |
| Coverage | % | / | |
|
Jacket | Material | / | Inner Jacket: PVC + Outside Jacket: PE |
| Hardness | A | / | |
| Outside Diameter | mm | 5.8 / 7.2 | |
| Average Thickness | mm | / | |
| Color | / | BLACK | |
| Marking Color | / | WHITE | |
| Marking | Jacket | / | according to the customer’s requirements |
| Electrical Properties | ||
| Conductor Resistance at 20°C |
UL 444 & CSA C22.2 No. 214 | ≤ 9.5 Ω / 100m |
| Resistance unbalance within a pair | ≤ 2% | |
| Dielectric Strength Test Voltage (cd/cd): 1.00KV DC or 0.7 KV AC for 1 min Test Voltage (cd/screen): 1.00KV DC or 0.7 KV AC for 1 min |
No breakdown | |
| Insulation Resistance at 20°C after 2min of electrification under a DC voltage between 100 & 500V |
>1500 MΩ / 100m | |
| Mutual capacitance | 5600pF / 100m MAX | |
| Capacitance unbalance pair to ground at 800Hz or 1 kHz | ≤ 160 pF / 100m | |
| Characteristic impedance at 100MHz | 100 ± 15 Ω | |
| Spark Test | 2000 ± 250VOC | |
| Transmission Properties | |||||||||
| CAT 6 U/UTP | |||||||||
|
No. |
Frequency |
Attenuation (Max) | Propagation Delay (MAX) | Propagation Delay Skew (MAX) |
Return Loss (Min) |
NEXT (Min) |
PS NEXT (Min) |
EL-FEXT (Min) |
PS EL-FEXT (Min) |
| MHz | dB/100m | ns/100m | ns/100m | dB(on 100m) | dB(on 100m) | dB(on 100m) | dB(on 100m) | dB(on 100m) | |
| 1 | 4 | 3.78 | 552 | 45 | 23.01 | 66.27 | 63.27 | 55.96 | 52.96 |
| 2 | 8 | 5.32 | 546.73 | 45 | 24.52 | 61.75 | 58.75 | 49.94 | 46.94 |
| 3 | 10 | 5.95 | 545.38 | 45 | 25 | 60.3 | 57.3 | 48 | 45 |
| 4 | 16 | 7.55 | 543 | 45 | 25 | 57.24 | 54.24 | 43.92 | 40.92 |
| 5 | 20 | 8.47 | 542.05 | 45 | 25 | 55.78 | 52.78 | 41.98 | 38.98 |
| 6 | 25 | 9.51 | 541.2 | 45 | 24.32 | 54.33 | 51.33 | 40.04 | 37.04 |
| 7 | 31.25 | 10.67 | 540.44 | 45 | 23.64 | 52.88 | 49.88 | 38.1 | 35.1 |
| 8 | 50 | 13.66 | 539.09 | 45 | 22.21 | 49.82 | 46.82 | 34.02 | 31.02 |
| 9 | 62.5 | 15.38 | 538.55 | 45 | 21.54 | 48.36 | 45.36 | 32.08 | 29.08 |
| 10 | 100 | 19.8 | 537.6 | 45 | 20.11 | 45.3 | 42.3 | 28 | 25 |
| 11 | 125 | 22.36 | 537.22 | 45 | 19.43 | 43.85 | 40.85 | 26.06 | 23.06 |
| 12 | 200 | 28.98 | 536.55 | 45 | 18 | 40.78 | 37.78 | 21.98 | 18.98 |
| 13 | 250 | 32.85 | 536.28 | 45 | 17.32 | 39.33 | 36.33 | 20.04 | 17.04 |
| 14 | |||||||||
| 15 | |||||||||
| 16 | |||||||||
| 17 | |||||||||
| 18 | |||||||||
| Remarks: ＊ are the reference values. | |||||||||
Notices:
1. Open the packaging, check the products carefully, and take them gently.
2. Please strictly follow the wiring standards during construction, and do not tie or excessively bend the network cables.
3. When making RJ45 network cable connectors, please follow the T568B or T568A standards to ensure the correct wire sequence and avoid problems such as disconnected lines or unstable network connections.
4.It is best to use a single network cable at a distance of no more than 100 meters to ensure optimal transmission performance.
5. Ensure that the shielded network cable is grounded during installation.
Applications:
Widely used in office buildings, schools, research institutions, airports, high-speed trains, hospitals, hotels, industries, shopping malls, supermarkets, etc.
FAQ
UL/CE/RoHS/ETL/CPR Certificate Lan cable Cat6 U / UTP 23AWG Extend to 550MHz Solid Outdoor PVC+PE HIGH SPEED NETWORK
Q1. Can I order samples of Lan cables?
A: Yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A: 3-5 days for Sample preparing ,8-10 working days for mass production.
Q3. Do you have a minimum order quantity limit for network cable orders?
A: Low MOQ, 1pc for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by sea, which usually takes about 7 days to arrive.
Q5. How to proceed an order for network cable?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q6.Is it OK to print my logo on network cable product?
A: Yes. Please inform us formally before our production.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 10 years warranty to our products.
Q8: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.
Secondly, for individual defective products, we will remedy them as soon as possible and send them to you, or we can discuss solutions based on the actual situation to achieve 100% satisfaction for you.