Integrity Cable Co., Limited
High quality cable manufacturer！ 5G communication cable | EV Cable
Add to Cart
Cat6 UTP Cable 23AWG CMX Plenum PVC High Speed Network Cable 1000FT
Quick Detail:
· Bare solid copper conductor
· 250MHz
· Jacket PVC, CMX 60P, -20~75℃
· Rate temperature:60℃ 75℃
· InstallationTemperature: -30℃-+50℃
· CompliestoANSI/TIA-568-B.2&IS0/EC11801
· CE, RoHS, TUV, UL compliant, CPR, ETL, RCM, ISO9001
Description:
1. Provide 250MHz bandwidth within a distance of 90 meters. The typical application rate is 1000Mbps.
2. The Cat6 CMX-rated cable can be used for general-purpose indoor wiring and has certain flame retardant properties.
3. The product selects high-quality oxygen-free copper as the transmission conductor. At the same time, it adopts the design of a central cross-shaped PE skeleton to separate four individual pairs. The electrical transmission performance is reliable and excellent, reaching and exceeding the Category 6 system indicators, providing abundant margin support for the system link. It is convenient and fast for construction and laying.
4.This Category 6 cable not only meets the CMX flame retardant level, but also meets the performance standards of Category 6 network cables. Six types of network cables can support high-speed data transmission, with wide bandwidth, low attenuation, and strong anti-interference ability, meeting the needs of modern network communication. Specifically, the transmission frequency, attenuation crosstalk ratio (ACR), insertion loss, and other key performance indicators of the six types of network cables meet or exceed relevant international standards.
Specifications:
| Product Description: Cat 6 CMX UTP CABLE 4 X 2 X 23AWG | ||||||
| Rev.: A | ECN Description: | |||||
| Construction Item Description | Electrical Property | |||||
|
Conductor |
Material | Bare Solid Copper(elongation: 19-24%) | Conductor Resistance at 20°C | ≤ 9.5 Ω / 100m | ||
| OD | 23 AWG | Resistance unbalance within a pair | ≤ 2% | |||
|
Insulation |
Material |
HDPE 8303 | Insulation Resistance at 20°C after 2min of electrification under a DC voltage between 100 & 500V |
>1500 MΩ / 100m | ||
| OD | 1.01 ± 0.01 mm | Mutual capacitance | 5600 pF / 100m MAX | |||
| Average THK | 0.22 mm | Capacitance unbalance pair to ground at 800Hz or 1 kHz | ≤ 160 pF / 100m | |||
|
Color | 1p: white + 2 blue stripes & blue | Characteristic impedance at 100MHz | 100 ±15 Ω | |||
| 2p: white + 2 orange stripes & orange | Dielectric Strength Test Voltage (cd/cd,cd/screen): 1.00KV DC or 0.7 KV AC for 1 min |
No breakdown | ||||
| 3p: white + 2 green stripes & green | Mechanical Property | |||||
| 4p: white + 2 brown stripes & brown |
insulation | elongation before aging | ≥ 300% | |||
|
Pair Twist |
Lay & Direction | 1p: S=18.5 mm (26%) | tensile strength before aging | ≥12 MPa | ||
| 2p: S=15.5 mm (21%) | elongation after aging | ≥ 150 % | ||||
| 3p: S=20.5 mm (30%) | tensile strength after aging | ≥10.5 MPa | ||||
| 4p: S=14.0 mm (19%) |
jacket | elongation before aging | ≥ 150 % | |||
| OD | / | tensile strength before aging | ≥ 13.5 MPa | |||
|
Inner Assemble | Lay | S=90±5 mm | elongation after aging | ≥ 125 % | ||
| Direction | according to the drawing | tensile strength after aging | ≥ 12.5 MPa | |||
| Filler | cross member 4.5X4.5X0.4mmT | Packing | ||||
| OD | / | Inner Box | NA | |||
| Filler | Material | Ripcord | Master Carton | NA | ||
| Construction | 300D |
| ||||
|
Outside Shield | Shield | / | ||||
| Construction | / | |||||
| Material | / | |||||
| Coverage | / | |||||
|
Jacket | Material | PVC, Rated 60 or 75℃ | ||||
| Hardness | 81 ±3 | |||||
| OD | 6.0 ± 0.2 | |||||
| Average THK | 0.55~0.60 | |||||
|
Color | according to the customer's requirements | |||||
|
Marking Color | according to the customer's requirements | |||||
| Marking | according to the customer's requirements | |||||
| Electrical Properties | ||
| Conductor Resistance at 20°C | UL 444 & CSA C22.2 No. 214 | ≤ 9.5 Ω / 100m |
| Resistance unbalance within a pair | ≤ 2% | |
| Dielectric Strength Test Voltage (cd/cd): 1.00KV DC or 0.7 KV AC for 1 min Test Voltage (cd/screen): 1.00KV DC or 0.7 KV AC for 1 min |
No breakdown | |
| Insulation Resistance at 20°C after 2min of electrification under a DC voltage between 100 & 500V | >1500 MΩ / 100m | |
| Mutual capacitance | 5600pF / 100m MAX | |
| Capacitance unbalance pair to ground at 800Hz or 1 kHz | ≤ 160 pF / 100m | |
| Characteristic impedance at 100MHz | 100 ± 15 Ω | |
| Spark Test | 2000 ± 250VOC | |
| Transmission Properties | |||||||||
| CAT 6 CMX CABLE | |||||||||
|
No. |
Frequency |
Attenuation (Max) | Propagation Delay (MAX) | Propagation Delay Skew (MAX) |
Return Loss (Min) |
NEXT (Min) |
PS NEXT (Min) |
EL-FEXT (Min) |
PS EL-FEXT (Min) |
| MHz | dB/100m | ns/100m | ns/100m | dB(on 100m) | dB(on 100m) | dB(on 100m) | dB(on 100m) | dB(on 100m) | |
| 1 | 4 | 3.78 | 552 | 45 | 23.01 | 66.27 | 63.27 | 55.96 | 52.96 |
| 2 | 8 | 5.32 | 546.73 | 45 | 24.52 | 61.75 | 58.75 | 49.94 | 46.94 |
| 3 | 10 | 5.95 | 545.38 | 45 | 25 | 60.3 | 57.3 | 48 | 45 |
| 4 | 16 | 7.55 | 543 | 45 | 25 | 57.24 | 54.24 | 43.92 | 40.92 |
| 5 | 20 | 8.47 | 542.05 | 45 | 25 | 55.78 | 52.78 | 41.98 | 38.98 |
| 6 | 25 | 9.51 | 541.2 | 45 | 24.32 | 54.33 | 51.33 | 40.04 | 37.04 |
| 7 | 31.25 | 10.67 | 540.44 | 45 | 23.64 | 52.88 | 49.88 | 38.1 | 35.1 |
| 8 | 50 | 13.66 | 539.09 | 45 | 22.21 | 49.82 | 46.82 | 34.02 | 31.02 |
| 9 | 62.5 | 15.38 | 538.55 | 45 | 21.54 | 48.36 | 45.36 | 32.08 | 29.08 |
| 10 | 100 | 19.8 | 537.6 | 45 | 20.11 | 45.3 | 42.3 | 28 | 25 |
| 11 | 125 | 22.36 | 537.22 | 45 | 19.43 | 43.85 | 40.85 | 26.06 | 23.06 |
| 12 | 200 | 28.98 | 536.55 | 45 | 18 | 40.78 | 37.78 | 21.98 | 18.98 |
| 13 | 250 | 32.85 | 536.28 | 45 | 17.32 | 39.33 | 36.33 | 20.04 | 17.04 |
| 14 | |||||||||
| 15 | |||||||||
| 16 | |||||||||
| 17 | |||||||||
| 18 | |||||||||
| Remarks: ＊ are the reference values. | |||||||||
Notices:
1. Open the packaging, check the products carefully, and take them gently.
2. Please strictly follow the wiring standards during construction, and do not tie or excessively bend the network cables.
3. When making RJ45 network cable connectors, please follow the T568B or T568A standards to ensure the correct wire sequence and avoid problems such as disconnected lines or unstable network connections.
4.It is best to use a single network cable at a distance of no more than 100 meters to ensure optimal transmission performance.
5. Ensure that the shielded network cable is grounded during installation.
Applications:
Due to its high flame retardancy, excellent shielding effect, and Cat6 performance standards, CMX flame retardant Cat 6 network cables are widely used in applications that require secure and stable data transmission, such as data centers, hospitals, industrial automation, and other fields. In the data center, this cable provides high-speed and stable network connections for servers and storage devices, ensuring real-time transmission and processing of data. In hospitals, it provides reliable network connections for medical equipment, ensuring real-time updates and sharing of medical information. In the field of industrial automation, it provides stable communication support for industrial equipment to ensure the smooth operation of production lines.
FAQ
UL/CE/RoHS/ETL/CPR Certificate Lan cable Cat6 U / UTP 23AWG Extend To 550MHz CMX PVC Bare Solid Copper
Q1. Can I order samples of Lan cables?
A: Yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A: 3-5 days for Sample preparing ,15-45 days for mass production.
Q3. Do you have a minimum order quantity limit for network cable orders?
A: Low MOQ, 1pc for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by sea, which usually takes about 7 days to arrive.
Q5. How to proceed an order for network cable?
A: Firstly let us know your requirements or application.
1. We quote according to your requirements or our suggestions.
2. customer confirms the samples and places deposit for formal order.
3. We arrange the production.
Q6.Is it OK to print my logo on network cable product?
A: Yes. Please inform us formally before our production.
Q7: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.