Integrity Cable Co., Limited
High quality cable manufacturer！ 5G communication cable | EV Cable
Add to Cart
1.This Cat6 FTP Outdoor Lan Cable Provide a stable 250MHz bandwidth within a distance of 90 meters, enabling a typical application rate of 1000Mbps for seamless data transmission. This high - speed performance ensures efficient communication in various outdoor scenarios.This product is specifically designed for cabling in outdoor horizontal work areas, outdoor local area network cabling, and for laying on overhead lines or on walls. Its durable construction makes it an ideal choice for withstanding the rigors of outdoor environments.
2.For Cat6 FTP outdoor waterproof sheath cables, we have adopted an advanced waterproof structure. It consists of a PE sheath along with a polyester tape that is carefully wrapped around the four pairs of twisted - pair wires as a whole. This design allows it to be used in outdoor environments where there may be short - term water presence, as well as long - term exposure to sunlight and ultraviolet radiation without any degradation in performance.
3.A single - sided aluminum foil with a thickness of 0.06mm is longitudinally wrapped on the outside of the four pairs of twisted - pair wires as a whole. Compared with unshielded cables, under the premise of ensuring the same transmission bandwidth level, the anti - shielding interference ability of F/UTP shielded cables is significantly increased by 25dB and can reach an impressive 90dB. This enables it to be used in environments that require strong resistance to electromagnetic interference. The overall shielding system not only provides excellent signal shielding but also ensures data confidentiality.
4.Our Cat6 FTP 23AWG Bare Solid Copper Outdoor PVC + PE High - Speed Cable is 1000FT long. The cable is made of high - quality bare solid copper conductors, which offer low resistance and excellent conductivity. The 23AWG wire gauge ensures optimal signal strength and transmission quality. The PVC and PE combination in the cable jacket provides enhanced durability and protection against the elements. The cable is also designed with flexibility in mind, allowing for easy installation around corners and along various outdoor structures. It has a distinct color - coding system for easy identification during installation and maintenance. Additionally, the cable's connectors are of a high - grade, corrosion - resistant material to further extend its lifespan in outdoor conditions.
| Cable Type | FTP LAN CABLE |
| Category | Cat6 |
| Cable Length | 1000Ft |
| Conductor Material | Copper |
| Conductor Size | 23 AWG |
| Jacket Material | PE+PVC |
| Color | Black |
| Product Description: Cat6 FTP 23AWG Bare Solid Copper Outdoor Pvc+Pe High Speed Cable 1000FT | ||||||
| Rev.: A | ECN Description: | |||||
| Construction Item Description | Electrical Property | |||||
|
Conductor |
Material | Bare Solid Copper(elongation: 19 ~ 24%) | Conductor Resistance at 20°C | ≤ 9.5 Ω / 100m | ||
| OD | 23 AWG | Resistance unbalance within a pair | ≤ 2% | |||
|
Insulation |
Material |
HDPE 8303 | Insulation Resistance at 20°C after 2min of electrification under a DC voltage between 100 & 500V |
>1500 MΩ / 100m | ||
| OD | 1.14 ± 0.05 mm | Mutual capacitance | 5600 pF / 100m MAX | |||
| Average THK | 0.29 mm | Capacitance unbalance pair to ground at 800Hz or 1 kHz | ≤ 160 pF / 100m | |||
|
Color | 1p: white + 2 blue stripes & blue | Characteristic impedance at 100MHz | 100 ± 15 Ω | |||
| 2p: white + 2 orange stripes & orange | Dielectric Strength Test Voltage (cd/cd,cd/screen): 1.00KV DC or 0.7 KV AC for 1 min |
No breakdown | ||||
| 3p: white + 2 green stripes & green | Mechanical Property | |||||
| 4p: white + 2 brown stripes & brown |
insulation | elongation before aging | ≥ 300% | |||
|
Pair Twist |
Lay & Direction | 1p: S=20.0 mm (28%) | tensile strength before aging | ≥16 MPa | ||
| 2p: S=17.5 mm (24%)) | elongation after aging | NA | ||||
| 3p: S=22.0 mm (32%) | tensile strength after aging | NA | ||||
| 4p: S=15.5 mm (21%) |
jacket | elongation before aging | ≥350% | |||
| OD | / | tensile strength before aging | ≥9.7MPa | |||
|
Inner Assemble | Lay | S=90 ± 5 mm | elongation after aging | ≥263% | ||
| Direction | according to the drawing | tensile strength after aging | ≥7.3MPa | |||
| Filler | / | Packing | ||||
| OD | / | Inner Box | NA | |||
| Filler | Material | Ripcord | Master Carton | NA | ||
| Construction | 300D |
| ||||
|
Outside Shield | Shield | / | ||||
| Construction | / | |||||
| Material | / | |||||
| Coverage | / | |||||
|
Jacket | Material | Inner Jacket: PVC + Outside Jacket: PE | ||||
| Hardness | / | |||||
| OD | 7.2 / 8.2 | |||||
| Average THK | / | |||||
|
Color | Black | |||||
|
Marking Color | white | |||||
|
Marking | according to the customer's requirements | |||||
| Electrical Properties | ||
| Conductor Resistance at 20°C |
UL 444 & CSA C22.2 No. 214 | ≤ 9.5 Ω / 100m |
| Resistance unbalance within a pair | ≤ 2% | |
| Dielectric Strength Test Voltage (cd/cd): 1.00KV DC or 0.7 KV AC for 1 min Test Voltage (cd/screen): 1.00KV DC or 0.7 KV AC for 1 min |
No breakdown | |
| Insulation Resistance at 20°C after 2min of electrification under a DC voltage between 100 & 500V |
>1500 MΩ / 100m | |
| Mutual capacitance | 5600pF / 100m MAX | |
| Capacitance unbalance pair to ground at 800Hz or 1 kHz | ≤ 160 pF / 100m | |
| Characteristic impedance at 100MHz | 100 ± 15 Ω | |
| Spark Test | 2000 ± 250VOC | |
| Transmission Properties | |||||||||
| CAT 6 U/UTP | |||||||||
|
No. |
Frequency |
Attenuation (Max) | Propagation Delay (MAX) | Propagation Delay Skew (MAX) |
Return Loss (Min) |
NEXT (Min) |
PS NEXT (Min) |
EL-FEXT (Min) |
PS EL-FEXT (Min) |
| MHz | dB/100m | ns/100m | ns/100m | dB(on 100m) | dB(on 100m) | dB(on 100m) | dB(on 100m) | dB(on 100m) | |
| 1 | 4 | 3.78 | 552 | 45 | 23.01 | 66.27 | 63.27 | 55.96 | 52.96 |
| 2 | 8 | 5.32 | 546.73 | 45 | 24.52 | 61.75 | 58.75 | 49.94 | 46.94 |
| 3 | 10 | 5.95 | 545.38 | 45 | 25 | 60.3 | 57.3 | 48 | 45 |
| 4 | 16 | 7.55 | 543 | 45 | 25 | 57.24 | 54.24 | 43.92 | 40.92 |
| 5 | 20 | 8.47 | 542.05 | 45 | 25 | 55.78 | 52.78 | 41.98 | 38.98 |
| 6 | 25 | 9.51 | 541.2 | 45 | 24.32 | 54.33 | 51.33 | 40.04 | 37.04 |
| 7 | 31.25 | 10.67 | 540.44 | 45 | 23.64 | 52.88 | 49.88 | 38.1 | 35.1 |
| 8 | 50 | 13.66 | 539.09 | 45 | 22.21 | 49.82 | 46.82 | 34.02 | 31.02 |
| 9 | 62.5 | 15.38 | 538.55 | 45 | 21.54 | 48.36 | 45.36 | 32.08 | 29.08 |
| 10 | 100 | 19.8 | 537.6 | 45 | 20.11 | 45.3 | 42.3 | 28 | 25 |
| 11 | 125 | 22.36 | 537.22 | 45 | 19.43 | 43.85 | 40.85 | 26.06 | 23.06 |
| 12 | 200 | 28.98 | 536.55 | 45 | 18 | 40.78 | 37.78 | 21.98 | 18.98 |
| 13 | 250 | 32.85 | 536.28 | 45 | 17.32 | 39.33 | 36.33 | 20.04 | 17.04 |
| 14 | |||||||||
| 15 | |||||||||
| 16 | |||||||||
| 17 | |||||||||
| 18 | |||||||||
| Remarks: ＊ are the reference values. | |||||||||
Whether you're establishing a new network or upgrading an existing one, the Cat6 FTP 23AWG Bare Solid Copper Outdoor PVC + PE High - Speed Cable is an outstanding choice. It exhibits high compatibility with a wide array of devices, including routers, switches, and modems.
Here are some specific application occasions and scenarios where this cable shines:
Home and office networks: It serves as an excellent solution for connecting various devices such as computers, printers, and smart home appliances. The cable's high - speed and reliable data transfer capabilities ensure seamless communication within the local network, enabling efficient sharing of resources and quick access to shared files.
Data centers and server rooms: With its ability to handle high - speed data transfer rates, this cable is ideal for connecting servers, storage devices, and other critical network equipment. It guarantees the efficient operation of data - intensive applications, ensuring that data can be accessed and processed in a timely manner.
Video surveillance systems: In outdoor security setups, this cable can be used to connect IP cameras to a network video recorder (NVR). Its waterproof and anti - EMI features make it perfect for withstanding various outdoor conditions, providing stable and high - quality video monitoring around the clock. It can also be used in large - scale surveillance systems covering extensive areas, such as industrial parks or commercial complexes.
Industrial automation: In industrial environments, this cable's durable construction and strong resistance to EMI are of great value. It can be used to connect programmable logic controllers (PLCs), sensors, and actuators in factories, mines, or other harsh industrial settings. The cable's ability to maintain stable data transmission under electromagnetic interference ensures the smooth operation of automated processes, improving productivity and safety.
Outdoor wireless network extensions: When extending the coverage of outdoor Wi - Fi networks, this cable can be used to connect additional access points. Its outdoor - friendly design ensures that the connection remains stable even in different weather conditions, allowing for seamless wireless connectivity in parks, campuses, or other outdoor public spaces.
Overall, the Cat6 FTP 23AWG Bare Solid Copper Outdoor PVC + PE High - Speed Cable is a highly versatile and reliable networking cable. It can meet the demands of various applications and scenarios, whether you're in need of a cable for indoor networking or outdoor - specific requirements. It surpasses expectations when compared to other Cat6 Lan Cables, CAT6A Ethernet Cables, or Cat6a Lan Cables.
Q: What is the model number of the CAT6 cable?
A: The brand name is ITI-LINK.
Q: Where is the CAT6 cable made?
A: The CAT6 cable is made in SHENZHEN.
Q: Is the CAT6 cable suitable for outdoor use?
A: Yes, the CAT6 cable is designed for outdoor use .
Q: What is the maximum length of the CAT6 cable?
A: The maximum length of the CAT6 cable is 1000Ft.
Q. How do you ship the goods and how long does it take to arrive?
A: We usually ship by sea, which usually takes about 7 days to arrive.