Integrity Cable Co., Limited
High quality cable manufacturer！ 5G communication cable | EV Cable
Add to Cart
1.As a member of the Networking Cables category, this CAT6 FTP 23AWG 0.570±0.005mm Copper Solid Outdoor PE Cable is specifically engineered to not only meet but exceed industry standards, ensuring seamless compatibility with a vast majority of networking devices. The precise conductor dimensions of 0.570±0.005mm make it an outstanding choice for high - speed data transfer and rock - solid connectivity. With a generous cable length of 305 meters, it effortlessly bridges the gap between devices that are spaced far apart, maintaining top - notch speed and quality throughout.
2.The jacket material of this cable is polyethylene (PE), which is carefully selected for outdoor applications. This PE jacket provides exceptional protection against a wide range of environmental challenges such as moisture from rain, snow, or dew, dust and dirt that are common in outdoor settings, and extreme temperature variations, be it the scorching heat of the sun during summer or the freezing cold in winter. Unlike traditional materials, this PE jacket is highly durable and flexible even under harsh outdoor conditions, allowing for easy installation and the ability to navigate around obstacles in tight outdoor spaces like cable conduits or around building structures.
3.The conductor material in this cable is solid copper with a 23AWG specification. Copper is renowned for its excellent conductivity and remarkable durability. In an outdoor environment where signal interference can be a concern, the high - quality copper conductor ensures stable and high - speed data transfer, making it an ideal solution for reliable network connectivity.
| Product Attribute | Value |
| Cable Type | FTP |
| Category | Networking Cables |
| Cable Length | 1000FT |
| Conductor Size | 23 AWG |
| Conductor Material | Copper |
| Conductor Dimensions | 0.570±0.005mm |
| Color | Black |
| Jacket Material | PE |
| Product Description: CAT6 FTP Outdoor PE 0.570mm Solid Copper Network Lan Cable 1000ft | ||||||
| Rev.: A | ECN Description: | |||||
| Construction Item Description | Electrical Property | |||||
|
Conductor |
Material | Bare Solid Copper(elongation: 19-24%) | Conductor Resistance at 20°C | ≤ 9.5 Ω / 100m | ||
| OD | 23 AWG | Resistance unbalance within a pair | ≤ 5% | |||
|
Insulation |
Material |
HDPE 8303 | Insulation Resistance at 20°C after 2min of electrification under a DC voltage between 100 & 500V |
>1500 MΩ / 100m | ||
| OD | 1.14 ± 0.01 mm | Mutual capacitance | 5600 pF / 100m MAX | |||
| Average THK | 0.24 mm | Capacitance unbalance pair to ground at 800Hz or 1 kHz | ≤ 160 pF / 100m | |||
|
Color | 1p: white + 2 blue stripes & blue | Characteristic impedance at 100MHz | 100 ±15 Ω | |||
| 2p: white + 2 orange stripes & orange | Dielectric Strength Test Voltage (cd/cd,cd/screen): 1.00KV DC or 0.7 KV AC for 1 min |
No breakdown | ||||
| 3p: white + 2 green stripes & green | Mechanical Property | |||||
| 4p: white + 2 brown stripes & brown |
insulation | elongation before aging | ≥ 300% | |||
|
Pair Twist |
Lay & Direction | 1p: S=18.5 mm (26%) | tensile strength before aging | ≥12 MPa | ||
| 2p: S=15.5 mm (21%) | elongation after aging | ≥ 150 % | ||||
| 3p: S=20.5 mm (30%) | tensile strength after aging | ≥10.5 MPa | ||||
| 4p: S=14.0 mm (19%) |
jacket | elongation before aging | ≥350% | |||
| OD | / | tensile strength before aging | ≥9.7MPa | |||
|
Inner Assemble | Lay | S=90±5 mm | elongation after aging | ≥263% | ||
| Direction | according to the drawing | tensile strength after aging | ≥7.3MPa | |||
| Filler | cross member 5.0X5.0X0.5mmT | Packing | ||||
| OD | / | Inner Box | NA | |||
| Filler | Material | Ripcord | Master Carton | NA | ||
| Construction | 300D |
| ||||
|
Outside Shield | Shield | / | ||||
| Construction | / | |||||
| Material | / | |||||
| Coverage | / | |||||
|
Jacket | Material | LDPE | ||||
| Hardness | 30 | |||||
| OD | 7.2 ± 0.2 | |||||
| Average THK | 0.50~0.60 | |||||
|
Color | Black | |||||
|
Marking Color | according to the customer's requirements | |||||
| Marking | according to the customer's requirements | |||||
| Electrical Properties | ||
| Conductor Resistance at 20°C |
UL 444 & CSA C22.2 No. 214 | ≤ 9.5 Ω / 100m |
| Resistance unbalance within a pair | ≤ 2% | |
| Dielectric Strength Test Voltage (cd/cd): 1.00KV DC or 0.7 KV AC for 1 min Test Voltage (cd/screen): 1.00KV DC or 0.7 KV AC for 1 min |
No breakdown | |
| Insulation Resistance at 20°C after 2min of electrification under a DC voltage between 100 & 500V | >1500 MΩ / 100m | |
| Mutual capacitance | 5600pF / 100m MAX | |
| Capacitance unbalance pair to ground at 800Hz or 1 kHz | ≤ 160 pF / 100m | |
| Characteristic impedance at 100MHz | 100 ± 15 Ω | |
| Spark Test | 2000 ± 250VOC | |
| Transmission Properties | |||||||||
| CAT 6 U/UTP | |||||||||
|
No. |
Frequency |
Attenuation (Max) | Propagation Delay (MAX) | Propagation Delay Skew (MAX) |
Return Loss (Min) |
NEXT (Min) |
PS NEXT (Min) |
EL-FEXT (Min) |
PS EL-FEXT (Min) |
| MHz | dB/100m | ns/100m | ns/100m | dB(on 100m) | dB(on 100m) | dB(on 100m) | dB(on 100m) | dB(on 100m) | |
| 1 | 4 | 3.78 | 552 | 45 | 23.01 | 66.27 | 63.27 | 55.96 | 52.96 |
| 2 | 8 | 5.32 | 546.73 | 45 | 24.52 | 61.75 | 58.75 | 49.94 | 46.94 |
| 3 | 10 | 5.95 | 545.38 | 45 | 25 | 60.3 | 57.3 | 48 | 45 |
| 4 | 16 | 7.55 | 543 | 45 | 25 | 57.24 | 54.24 | 43.92 | 40.92 |
| 5 | 20 | 8.47 | 542.05 | 45 | 25 | 55.78 | 52.78 | 41.98 | 38.98 |
| 6 | 25 | 9.51 | 541.2 | 45 | 24.32 | 54.33 | 51.33 | 40.04 | 37.04 |
| 7 | 31.25 | 10.67 | 540.44 | 45 | 23.64 | 52.88 | 49.88 | 38.1 | 35.1 |
| 8 | 50 | 13.66 | 539.09 | 45 | 22.21 | 49.82 | 46.82 | 34.02 | 31.02 |
| 9 | 62.5 | 15.38 | 538.55 | 45 | 21.54 | 48.36 | 45.36 | 32.08 | 29.08 |
| 10 | 100 | 19.8 | 537.6 | 45 | 20.11 | 45.3 | 42.3 | 28 | 25 |
| 11 | 125 | 22.36 | 537.22 | 45 | 19.43 | 43.85 | 40.85 | 26.06 | 23.06 |
| 12 | 200 | 28.98 | 536.55 | 45 | 18 | 40.78 | 37.78 | 21.98 | 18.98 |
| 13 | 250 | 32.85 | 536.28 | 45 | 17.32 | 39.33 | 36.33 | 20.04 | 17.04 |
| 14 | |||||||||
| 15 | |||||||||
| 16 | |||||||||
| 17 | |||||||||
| 18 | |||||||||
| Remarks: ＊ are the reference values. | |||||||||
1.The 305 - meter CAT6 FTP 23AWG 0.570±0.005mm Copper Solid Outdoor PE Cable is an outstanding networking cable in the Cat6 family. It has a wider bandwidth than Cat5 and Cat5e, enabling faster data transfer. Its FTP shielding effectively resists electromagnetic interference and crosstalk, crucial in outdoor environments with many interference sources.
2.This cable has extensive outdoor applications. In homes, it connects security cameras, outdoor Wi - Fi access points, and smart garden devices. In commercial settings with outdoor extensions, it links outdoor workstations, surveillance systems, and different outdoor facilities.
3.For outdoor LAN connections, it connects computers, servers, etc. in server rooms or data centers. When connecting outdoor routers and modems to broadband, it provides high - speed internet for activities like video streaming and online gaming.
4.It suits various residential and commercial outdoor scenarios, like connecting smart outdoor lighting, entertainment systems, digital signage, payment kiosks, and security systems.
5.With great quality and performance, this cable is an excellent investment for improving outdoor network connectivity. Its compatibility with Cat6a technology supports future upgrades. Don't miss the chance to get it for faster, more reliable outdoor network connections and improved network operations.
Q: What is the brand name of the product?
A: The brand name of the product is ITI-LINK.
Q: What is the model number of the product?
A: The model number of the product is ITI-CT6F-008.
Q: Where is the product manufactured?
A: The product is manufactured in SHENZHEN.
Q: Is this a CAT6 cable?
A: Yes, this is a CAT6 cable.
Q: What is the maximum data transfer rate supported by the cable?
A: The cable supports a maximum data transfer rate of 10 Gbps.
Q. How to proceed an order for network cable?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q.Is it OK to print my logo on network cable product?
A: Yes. Please inform us formally before our production.